Start a new topic

What's the maximum crossarm length to support 33kV line on Wolf conductor on wooden poles?

What's the maximum crossarm length to support 33kV line on Wolf conductor on wooden poles?

1 Comment

You can try to use the software to validate your question.

So the steps to this in general are:

  • Input the pole types you have available in the Pole Library
  • Input the crossarms and any other equipment in the Components Library
  • Go into the Constructions library and create a new construction (copy a similar one and edit it)
  • Then in your model, you can edit the pole type and conductors to match your real-life case (also edit your conductors if they are not in the existing library).
  • Then when you have your model element in place you should be able to analyse this.
You may have to make sure you edit your environment load factors etc so that you can measure your modelled structures in every day, max wind and hot conditions etc.
Login or Signup to post a comment