Individual cable tensions on a conductor span
In order to specify tensions for individual cables: Place your conductor span(s) Using the move and select tool, click on a conductor span and scroll dow...
Fri, 18 Dec, 2020 at 2:35 PM
No cable constructions
To place a pole with construction, but no cables we do as follows: Click on the pole tool and place down the desired pole at desired location Click '...
Fri, 23 Oct, 2020 at 4:31 PM
Modelling with LiDAR
Contact us at to set this up. Using LiDAR in a Power Lines Pro model is very easy: Import the data by clicking the + next to &#...
Fri, 11 Sep, 2020 at 5:14 PM
Conductor spans properties
To reach this: Click on the desired conductor span  Then click on the spans tab in the properties pane The right hand information pane will displa...
Fri, 11 Sep, 2020 at 5:12 PM
Tip Load
In order to see detailed tip load information: Click on the pole to be examined Click on the structure panel on the right hand side in the properties tab...
Fri, 11 Sep, 2020 at 5:12 PM
Modelling poles / conductors / constructions / components
For an in depth explanation on these features, follow this guide:
Fri, 11 Sep, 2020 at 5:11 PM
Creep Modelling
Creep is calculated as per AS7000. To visualize the effect of creep, in top menu: 1. Go to Environments 2. For the appropriate environments, tic...
Fri, 11 Sep, 2020 at 5:14 PM
Mid-Span Poles
To create mid-span poles: Go into new pole mode on the left hand tool bar. Click on the conductor where the mid-span pole is to go, to place the po...
Mon, 8 May, 2017 at 2:03 PM