General

Example Models from AS7000 HB 331-2012
The accompanying files are scenarios modeled directly from worked examples in HB 331-2012 Overhead line design. The worked examples are from the fol...
Wed, 22 Apr, 2015 at 3:06 PM
DXF Import
There are two ways the DXF can be interpreted by Power Lines Pro: Topographic Contour This is for DXF files containing dense 3D information,...
Wed, 14 Dec, 2016 at 10:22 AM
Tip Load Panel
To see detailed tip load results: Select the pole to be examined  Click on the Tip Load tab in the right hand side panel  ...
Tue, 12 May, 2015 at 12:19 PM
Conductor Clearance Measurement Tool
Conductor Clearance Measurement tool is located in the left hand tool bar. Use this tool to measure conductor clearance to anything other than ground,...
Mon, 4 Jan, 2016 at 7:21 PM
Overview Limit State Table
  (1) Environments Environments Column shows the list of Environments that can be applied to the pole. Checking any box in the envi...
Thu, 21 May, 2015 at 2:57 PM
Resultant Forces Graph
The forces graph is a lotus plot with the following features: (1) Pole  The pole is represented by a solid circle at the center of the g...
Sun, 10 May, 2015 at 3:32 PM
Detailed Forces Table
Pole Force Details (1) Component Forces When the mouse is not hovering over the Resultant Forces Graph, the component forces w...
Tue, 12 May, 2015 at 12:20 PM
Advanced Tip Load Features
Diagram Settings The following settings will change the what kind of results are displayed in the ...
Thu, 21 May, 2015 at 5:26 PM
Environment Settings
The Environment settings can be accessed via the top menu bar.  The environment settings allow the user to input the following parameters: Temperatur...
Mon, 17 Jul, 2017 at 4:16 PM
Sag Measurement
(1) Use Field Data To input sag measurements from field surveys, first select the conductor in the work space. Then click on Use Field Data on the ...
Fri, 22 May, 2015 at 12:02 AM